·Up to 4 megapixel 2688×1520 @ 20fps resolution·Standard video compression with high compression ratio
True WDR

Hikvision 4MP IP Dome Camera , True WDR, Audio, DS-2CD2142FWD-IS

Hikvision
Compare

Where's the price?

Login for price
SKU: DS-2CD2142FWD-IS Categories: ,

Product Description

·Up to 4 megapixel 2688×1520 @ 20fps resolution

·Standard video compression with high compression ratio, ROI (region of interest) encoding

·Progressive scan CMOS, capture motion video without incised margin

·Support dual stream, and the sub-stream for mobile surveillance

·High-performance and long service life Infrared LED, Approx. 10 to 30 meters IR range

·Two-way audio

·Audio I/O

·Support 120dB wide dynamic range

·IR cut filter with auto switch

·PoE (Power over Ethernet)

·Built-in Micro SD/SDHC/SDXC card slot, up to 128 GB

·Ingress Protection level: IP66

·Impact Protection: IK08

·3-axis adjustment

·Support VCA, which is compatible with NVR for the second time of video searching and analysing

 

Camera Camera Camera
Image Sensor: | 1/3″ Progressive Scan CMOS
Min. Illumination: | 0.01Lux @ (F1.2, AGC ON) ,0 Lux with IR
0.028 Lux @ (F2.0, AGC ON) ,0 Lux with IR
Shutter time: | 1/3 s to 1/100,000 s
Lens Mount: | M12
Adjustment Range: | Pan:0° – 355°, Tilt: 0° – 75°, Rotation: 0-355°
Day& Night: | IR cut filter with auto switch
Wide Dynamic Range: | Digital WDR
Digital noise reduction: | 3D DNR
Compression Standard Compression Standard Compression Standard
Video Compression: | H.264/MJPEG
Video bit rate: | 32Kbps~12Mbps
Dual Stream: | Yes
Image Image Image
Image Settings: | Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
BLC: | Yes, zone configurable
ROI: | Support
Network Network Network
Network Storage: | Micro SD/SDHC/SDXC card with ANR (up to 64G), NAS (Support NFS, SMB/CIFS)
Alarm Trigger: | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception
Protocols: | TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour
System Compatibility: | ONVIF, PSIA, CGI, ISAPI
Interface Interface Interface
Communication Interface: | 1 RJ45 10M / 100M Ethernet interface
Alarm: | 1 alarm I/O
General General General
Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply: | 12 VDC ± 10%, PoE (802.3af)
Power Consumption: | Max. 5W
Impact Protection: | IEC60068-2-75Eh, 50J; EN50102, IK10
Weather Proof: | IP66
IR Range: | Up to 30m
Dimensions: | ?111 × 82 (4.4” × 3.2”)
Weight: | 500g (1.1 lb)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Datasheet for DS-2CD2142FWD-IS

User manual for DS-2CD2142FWD-IS

Have a question about the product?


Guest
Daniela Caro
5 months 14 days ago

How is the camera mounted?

Support
Wrightwood Surveillance
5 months 14 days ago

Hi Daniela, the camera is mounted to a surface with supplied screws. The surface should have at least 1″ hole for the pigtail to go through in the center. To access the mounting screws the dome of the camera has to be removed which is done with the supplied tool. Round junction boxes and wall mounts can also be purchased specifically for this camera as well. The wall mounts allow the camera to be mounted on the wall and be horizontal.